🍪 This website requires cookies to provide all of it's features. Please enable your browser cookies.
Accept All Decline All
“API 600 bronze valves” refers to bronze valves whose dimensions and pressure boundaries follow the American standards system: face-to-face per ANSI B16.10, flanges per ANSI B16.5, butt-weld ends per ANSI B16.25, pressure ratings per Class 150–900, sizes NPS 2″–24″, and pressure testing per API 598. It should be noted that API 600 itself is a cast steel gate valve standard, and bronze is not within its material scope—materials and pressure-temperature ratings are issued separately in accordance with copper alloy standards.
API 600 is the design and manufacturing standard for cast steel gate valves, and its material list does not include copper alloys. Therefore, the accurate meaning of the term “API 600 bronze valve” is: dimensions and pressure boundaries follow the American standards system to which API 600 belongs (ANSI B16.10 face-to-face, ANSI B16.5 flanges, Class 150–900 pressure ratings), while materials and pressure-temperature ratings are issued separately in accordance with copper alloy standards—cast copper alloys per ASTM B148, and copper alloy flange dimensions per ASME B16.24. If overseas procurement documents require “compliance with API 600,” it is advisable to also specify the material standard to avoid mismatches during acceptance.
Copper alloys have two other hard boundaries: the temperature limit is approximately 250–300°C, above which strength drops rapidly, so Class 600 and 900 bronze valves are essentially low-temperature valves; sulfide- and ammonia-containing media are prohibited for aluminum bronze. Material grades are still selected by flow velocity: C95800 for flowing seawater, C95500 for sand-laden sections, C95600 for low-velocity sections, and C95200 or C95300 for general media.
Meaning of the standard: Dimensions and pressure boundaries follow the American standards system (ANSI B16.10/B16.5, Class 150–900); materials and pressure-temperature ratings are issued separately in accordance with copper alloy standards. Both must be stated in procurement documents.
Dimension verification: Flanges per ANSI B16.5, face-to-face per ANSI B16.10, end connections available in RF, RTJ, or butt-weld (ANSI B16.25); the face-to-face dimensions of the three are not the same, so verify before replacement.
Material selection: C95800 for flowing seawater, C95500 for sand-laden sections, C95600 for low-velocity sections; C95200 or C95300 for general industrial media; C61900 for forgings; C63200 for heavy-duty parts.
Temperature and medium: Copper alloys are limited to approximately 250–300°C, and Class ratings are valid only within this temperature band; H₂S- and ammonia-containing media are prohibited; at high Class, the design is reduced-bore.
Optional add-ons: Gear operation, extended stem, API 607 fire-safe, EN 10204 3.1/3.2 material certificates, locking device.
Q: Do bronze valves really comply with API 600?
The accurate statement is: dimensions and pressure boundaries follow the American standards system to which API 600 belongs, while API 600 itself is a cast steel gate valve standard whose material list does not include copper alloys. Therefore, materials and pressure-temperature ratings must be issued separately in accordance with copper alloy standards.
Q: Is Class 150 equal to PN16?
No. Class is an ASME B16.34 pressure rating and PN is a European nominal pressure; their temperature bases differ. Class 150 at ambient temperature corresponds to approximately PN20, and Class 300 to approximately PN50. They cannot be interchanged as PN16/PN40.
Q: What standards apply to pressure testing and leakage?
Shell and sealing tests are performed per API 598, with leakage judged against the allowable values specified in that standard for the corresponding size.
In the Philippines, for the National Irrigation Administration’s irrigation pump station upgrade project in northern Luzon, 480 NPS 3–12, Class 150 API 600 bronze gate valves were procured, manufactured strictly to ASME B16.10 for face-to-face dimensions, directly replacing failed cast iron gate valves on existing American-standard pipelines without cutting or adjusting pipe sections. After three years in service: zero internal leakage and zero stem seizure. Water conveyance efficiency increased by 16%, and a follow-up order of 220 units of the same type was placed for the Phase II pump stations.
Class150API600 bronze valves
| NPS | in | 2 | 2 1/2 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 |
| d | mm | 51 | 64 | 76 | 102 | 127 | 152 | 203 | 254 | 305 | 337 | 387 | 438 | 489 | 591 |
| L(RF) | mm | 178 | 190 | 203 | 229 | 254 | 267 | 292 | 330 | 356 | 381 | 406 | 432 | 457 | 508 |
| L(BW) | mm | 216 | 241 | 283 | 305 | 381 | 403 | 419 | 457 | 502 | 572 | 610 | 660 | 711 | 813 |
| L(RTJ) | mm | 191 | 203 | 216 | 241 | 267 | 279 | 305 | 343 | 368 | 394 | 419 | 445 | 470 | 521 |
| d1 | mm | 92 | 105 | 127 | 157 | 186 | 216 | 270 | 324 | 381 | 413 | 470 | 533 | 584 | 692 |
| d2 | mm | 120.5 | 139.5 | 152.5 | 190.5 | 216 | 241.5 | 298.5 | 362 | 432 | 476 | 540 | 578 | 635 | 749.5 |
| D | mm | 152 | 178 | 190 | 229 | 254 | 279 | 343 | 406 | 483 | 533 | 597 | 635 | 699 | 813 |
| b | mm | 16 | 18 | 19 | 24 | 24 | 26 | 29 | 31 | 32 | 35 | 37 | 40 | 43 | 48 |
| n-Фd | mm | 4-19 | 4-19 | 4-19 | 8-19 | 8-22 | 8-22 | 8-22 | 12-25 | 12-25 | 12-29 | 16-29 | 16-32 | 20-32 | 20-35 |
| H | mm | 400 | 435 | 515 | 595 | 725 | 780 | 975 | 1150 | 1380 | 1545 | 1733 | 1915 | 2122 | 2520 |
| H1 | mm | 820 | 1020 | 1200 | 1430 | 1580 | 1780 | 1990 | 2220 | 2600 | |||||
| W | mm | 200 | 200 | 250 | 280 | 280 | 300 | 350 | 400 | 450 | 500 | 500 | 500 | 600 | 600 |
| W1 | mm | 310 | 310 | 310 | 310 | 310 | 460 | 460 | 460 | 460 |
Class300 API600 bronze valves
| NPS | in | 2 | 2 1/2 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 |
| d | mm | 51 | 64 | 76 | 102 | 127 | 152 | 203 | 254 | 305 | 337 | 387 | 432 | 483 | 584 |
| L(RF) | mm | 216 | 241 | 283 | 305 | 381 | 403 | 419 | 457 | 502 | 762 | 838 | 914 | 991 | 1143 |
| L(BW) | mm | 216 | 241 | 283 | 305 | 381 | 403 | 419 | 457 | 502 | 762 | 838 | 914 | 991 | 1143 |
| L(RTJ) | mm | 232 | 257 | 298 | 321 | 397 | 419 | 435 | 473 | 518 | 778 | 854 | 930 | 1010 | 1165 |
| d1 | mm | 92 | 105 | 127 | 157 | 186 | 216 | 270 | 324 | 381 | 413 | 470 | 533 | 584 | 692 |
| d2 | mm | 127 | 149 | 168.5 | 200 | 235 | 270 | 330 | 387.5 | 451 | 514.5 | 571.5 | 628.5 | 686 | 813 |
| D | mm | 165 | 190 | 210 | 254 | 279 | 318 | 381 | 445 | 521 | 584 | 648 | 711 | 775 | 914 |
| b | mm | 23 | 26 | 29 | 32 | 35 | 37 | 42 | 48 | 51 | 54 | 58 | 61 | 64 | 70 |
| n-Фd | mm | 8-19 | 8-22 | 8-22 | 8-22 | 8-22 | 12-22 | 12-25 | 16-29 | 16-32 | 20-32 | 20-35 | 24-35 | 24-35 | 24-41 |
| H | mm | 420 | 446 | 537 | 619 | 722 | 806 | 1000 | 1240 | 1425 | 1585 | 1790 | 1960 | 2158 | 2576 |
| H1 | mm | 650 | 750 | 835 | 1030 | 1280 | 1460 | 1620 | 1830 | 2000 | 2220 | 2620 | |||
| W | mm | 200 | 200 | 250 | 280 | 300 | 350 | 400 | 450 | 500 | 500 | 600 | 650 | 750 | 900 |
| W1 | mm | 310 | 310 | 310 | 310 | 310 | 310 | 460 | 460 | 460 | 460 | 600 |
Class600 API600 bronze valves
| NPS | in | 2 | 2 1/2 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 |
| d | mm | 51 | 64 | 76 | 102 | 127 | 152 | 200 | 248 | 298 | 327 | 375 | 419 | 464 | 559 |
| L(RF) | mm | 292 | 330 | 356 | 432 | 508 | 559 | 660 | 787 | 838 | 889 | 991 | 1092 | 1194 | 1397 |
| L(BW) | mm | 292 | 330 | 356 | 432 | 508 | 559 | 660 | 787 | 838 | 889 | 991 | 1092 | 1194 | 1397 |
| L(RTJ) | mm | 295 | 333 | 359 | 435 | 511 | 562 | 664 | 791 | 841 | 892 | 994 | 1095 | 1200 | 1407 |
| d1 | mm | 92 | 105 | 127 | 157 | 186 | 216 | 270 | 324 | 381 | 413 | 470 | 533 | 584 | 692 |
| d2 | mm | 127 | 149 | 168.5 | 216 | 267 | 292 | 349 | 432 | 489 | 527 | 603 | 654 | 724 | 838 |
| D | mm | 165 | 190 | 210 | 273 | 330 | 356 | 419 | 508 | 559 | 603 | 686 | 743 | 813 | 940 |
| b | mm | 26 | 29 | 32 | 38 | 45 | 48 | 56 | 64 | 67 | 70 | 77 | 83 | 89 | 102 |
| n-Фd | mm | 8-19 | 8-22 | 8-22 | 8-25 | 8-29 | 12-29 | 12-32 | 16-35 | 20-35 | 20-38 | 20-41 | 20-44 | 24-44 | 24-52 |
| H | mm | 444 | 500 | 558 | 665 | 760 | 868 | 1073 | 1263 | 1600 | 1705 | 1835 | |||
| H1 | mm | 585 | 695 | 790 | 900 | 1110 | 1300 | 1650 | 1750 | 1900 | 2020 | 2172 | 2650 | ||
| W | mm | 200 | 250 | 280 | 300 | 350 | 450 | 500 | 650 | 700 | 900 | 900 | |||
| W1 | mm | 310 | 310 | 310 | 310 | 310 | 460 | 460 | 460 | 460 | 600 | 600 | 600 |
Class900 API600 bronze valves
| NPS | in | 2 | 2 1/2 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 |
| d | mm | 47 | 57 | 73 | 98 | 121 | 146 | 190 | 234 | 282 | 311 | 354 | 400 | 444 | 533 |
| L(RF) | mm | 368 | 419 | 381 | 457 | 559 | 610 | 737 | 838 | 965 | 1029 | 1130 | 1219 | 1321 | 1549 |
| L(BW) | mm | 368 | 419 | 381 | 457 | 559 | 610 | 737 | 838 | 965 | 1029 | 1130 | 1219 | 1321 | 1549 |
| L(RTJ) | mm | 371 | 422 | 384 | 460 | 562 | 613 | 740 | 841 | 968 | 1039 | 1140 | 1232 | 1334 | 1568 |
| d1 | mm | 92 | 105 | 127 | 157 | 186 | 216 | 270 | 324 | 381 | 413 | 470 | 533 | 584 | 692 |
| d2 | mm | 165 | 190.5 | 190.5 | 235 | 279.4 | 317.5 | 393.7 | 469.9 | 533.4 | 558.8 | 615.9 | 685.8 | 749.3 | 901.7 |
| D | mm | 216 | 244 | 241 | 292 | 349 | 381 | 470 | 545 | 610 | 640 | 705 | 785 | 855 | 1040 |
| b | mm | 38.5 | 41.5 | 38.5 | 44.5 | 51 | 56 | 64 | 70 | 79.5 | 86 | 89 | 102 | 108 | 140 |
| n-Фd | mm | 8-26 | 8-29 | 8-26 | 8-32 | 8-35 | 12-32 | 12-39 | 16-39 | 20-39 | 20-42 | 20-45 | 20-51 | 20-54 | 20-67 |
| H | mm | 500 | 550 | 610 | 702 | 850 | 980 | 1100 | 1320 | 1500 | 1900 | 2050 | |||
| H1 | mm | 660 | 750 | 900 | 1060 | 1140 | 1370 | 1560 | 1950 | 2100 | 2300 | 2450 | 2600 | ||
| W | mm | 280 | 280 | 300 | 350 | 400 | 500 | 650 | 700 | 900 | 900 | 900 | |||
| W1 | mm | 310 | 310 | 310 | 460 | 460 | 460 | 460 | 600 | 600 | 600 | 600 | 600 |
For low-pressure water supply, drainage, and fire protection systems, conventional flanged check valves are costly and require significant installation space. A wafer check valve is installed between two pipeline flanges, with a face-to-face length of only one-third that of a flanged design. Its cost is typically less than half that of a flanged check valve of the same size, making it one of the most widely used check valve configurations for low-pressure water systems.
This series is manufactured in accordance with API 594, covering DN50–DN600 and PN10–PN25. Valve bodies are available in ductile iron and stainless steel, and every valve undergoes shell and sealing tests in accordance with ISO 5208.
Face to Face Dimensions:ANSI B16.10
Flange end Dimension :ANSI B16.5
Butt Welded Dimensions:ANSI B16.25
Design and Manufacture:BS1873
Pressure Test:API598
Materials:WCB 、WC6 、WC9 、CF8、 CF8M、 CF3、 CF3M 、CN7M、LC1LC2、LC3、LCB、LCC、Monel、20# Alloys、4A、5A、C95800、C95500, ect.
Installing an ANSI-dimensioned check valve on a pipeline designed to the European PN system can result in incompatible face-to-face dimensions and flange bolt-hole patterns, making installation impossible without modification. DIN check valves are specifically designed to match European dimensional standards, with face-to-face dimensions and flange drilling patterns manufactured in accordance with applicable EN standards for direct installation.
This series is manufactured in accordance with DIN standards, covering DN50–DN600 and PN10–PN40. Valve bodies are available in cast steel, cast iron, and bronze, and every valve undergoes pressure testing in accordance with DIN 3230.
Corporate Mission: Create Value for Clients, Create Opportunities for Staff, Create Efficiency for Corporate, Create wealth for Society.Quality+Service=Satisfaction.